【纳利普】NLP6214电源管理IC 25W电源方案充电器适配器

不仅仅是代理
更是独特芯片方案设计商

网站首页

PCBA方案设计

产品展厅

-- 产品展厅 -- 电源管理IC -- 纳利普NLP -- PSR驱动 --

【纳利普】NLP6214电源管理IC 25W电源方案充电器适配器

1.General Primary Side Constant-Current(CC) control Supports DCM and CCM Operation.
2.±5% CC Regulation,±1% CV Regulation with Fast Dynamic Response.
3.CC Algorithm Compensates for Line Variation and Transformer Inductance Tolerance.
4.Less than 75mW standby power for sub24W applications.
5.Current Mode Control;Built-in Frequency Shuffling;Fixed 65KHz Switching Frequency.
6.Green Mode and Burst Mode Control;On-chip Thermal Shutdown.
7.Cycle-by-Cycle Current Limiting.Very Low Startup and Operation Current.
8.Built-in Leading Edge Blanking;Built-in Slope Compensation.

189-2458-5723

在线咨询

PDF下载

如需产品PDF资料，请联系在线客服!

PART 2

产品参数

管脚封装：

IC管脚示意图	管脚号	管脚名称	描述
	1	GND	The ground the IC
	2	SEL	Connect a capacitor between SEL and GND, the IC will work in CC/CV mode. If SEL pin is floating, The IC will work in CV mode only
	3	VDD	IC power supply pin
	4	FB	Feedback input pin
	5	CS	Current sense input pin
	6,7,8	DRAIN	The Drain pin is designed to connect directly to theprimary lead of the transformer and is capable of switching a maximun of 650V